Cabinet Preparation For Hoods Support - Haier 3000 Series User Manual

English
Cabinet Preparation for Hood Support
Mount the hood so that the bottom of the hood is between 24"-30" above the
cooktop.
Warning! When cutting or drilling into wall or cabinet, be careful not to cut
existing electrical wiring.
1. If the bottom of the cabinet is recessed above the bottom of the
cabinet door, then it is necessary to install wood strips on each side
of the recessed area on the bottom of the cabinet where the range
hood will be mounted. The wood strips should line up with the 4
keyhole slots on the top of the range hood. Fasten the wood strips
with wood screws about 3" from each end.
Note: The thickness of the wood strips should be slightly more than
the recessed dimension. The length should be cut to size.
2. Measure and mark the electrical wiring opening in the wall or the
cabinet. If the hood is to be vented, also mark and measure the duct
opening in the wall or cabinet.
5