Wiring Diagrams; Installing Ductwork; Hood Installation - Haier HHX7030 User Manual

Hide thumbs Also See for HHX7030:

Table of Contents

Available languages

English

Wiring Diagrams

• Your new range hood will operate at the highest efficiency if the number of elbow

and the length of the duct are kept to a minimum. The back draft damper flap

attached to the damper frame assembly, which is supplied with the hood, does not

impede airflow significantly. You may leave this in place even if you install a wall

or roof cap with another back draft damper.

Note: All wiring installation must comply with local and national electrical code

regulations.

1. Transfer mounting holes to wall where hood is to be mounted.

2. Lift the hood into position and guide the electrical cable

through the electrical cable clamp on the hood.

3. Securely fasten the four wood screws.

4. Secure the electrical cable in the cable clamp while allowing sufficient length in

the hood to connect the field wires to the hood wires. Attach damper to the top

of the hood.

Table of Contents

Table of Contents