Cleaning The Inside Of The Machine (Bottom Plate Cleaning) - Canon MP490 series On-Screen Manual

> Maintenance
Advanced Guide

Cleaning the Inside of the Machine (Bottom Plate Cleaning)

This section explains how to clean the inside of the machine. If the inside of the machine becomes dirty,
printed paper may get dirty, so we recommend performing cleaning regularly.
1.
Make sure that the machine is turned on.
2.
Open the Paper Output Tray.
Open the Paper Output Tray gently.
3.
Open the Output Tray Extension.
4.
Menu button.
Press the
5.
Use the button to select Maintenance, then press the
The Maintenance screen is displayed.
6.
Use the button to select Bottom plate cleaning, then press the
The confirmation screen is displayed.
7.
Use the button to select Yes, then press the
8.
Remove any paper from the Rear Tray, follow the on-screen instructions.
9.
Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the
paper, follow the on-screen instructions.
10.
Load this and only this sheet of paper on the Rear Tray with the open side facing to
the front, follow the on-screen instructions.
(A) Load the paper after unfolding it.
The paper cleans the inside of the machine as it feeds through the machine.
Check the folded part of the ejected paper. If it is smudged with ink, perform Bottom Plate Cleaning
again.
> Cleaning Your Machine > Cleaning the Inside of the Machine (Bottom Plate Cleaning)
button.
OK
button.
OK
OK button.