Removing The Memory Card - Canon MP490 series On-Screen Manual

Important
Part of the memory card will protrude from the Card Slot, but do not force it into the slot any
further. This can damage the machine or the memory card.
Make sure that the memory card is correctly oriented before inserting it into the Card Slot. If
you force the memory card into the Card Slot in the wrong orientation, the memory card or the
machine can be damaged.
Do not insert more than one memory card at a time.
4.
Close the Card Slot Cover.

Removing the Memory Card

Important
If you used the Card Slot as the memory card drive of a computer, you must perform the "safe
removal" operation on your computer before physically removing the memory card from the
machine.
- In Windows, right-click the removable disk icon and click Eject. If Eject does not appear on the
screen, make sure that the
- In Macintosh, drag (Mount drive) into the Trash.
1.
Open the Card Slot Cover.
2.
Make sure that the Access lamp is lit, and remove the memory card.
Hold the part of the memory card that is protruding and remove it straightforward from the machine.
Important
Do not remove the memory card while the
while the machine is reading or writing data from/to the memory card. If you remove the
memory card or turn off the power while the
memory card can be damaged.
3.
Close the Card Slot Cover.
Access lamp is lit, and then remove the memory card.
lamp is flashing. The
Access
Access
lamp is flashing, the data saved on the
Access
lamp flashes
Page top