Canon MP490 series On-Screen Manual page 594

> Changing the Machine Settings
Advanced Guide
Settings on the LCD
Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extension amount as an example.
1.
Make sure that the machine is turned on, then press the
The top menu screen is displayed.
2.
Use the button to select Device settings, then press the OK button.
The Device settings screen is displayed.
3.
Use the button to select a menu, then press the
The setting screen for the selected item is displayed.
4.
Use the button to select a setting item, then press the
Copy auto intensity
Prevent abrasion
Extension amount
AutoPhotoFix setting
Date display
Read/write attribute
Quiet mode
Key repeat
Language selection
Reset setting
> Changing the Machine Settings on the LCD
Menu
OK
> Changing the Machine
button.
button.
button.
OK