Basic of Disassembly
220 to 240V specification
1. Remove the timing belt 1 from the T pulley 2 and the motor T-pulley 3.
2. Remove the 2 screws 1, and then remove the motor assy 4 of the motor
3P supply assy.
*Key point
• Be careful not to damage the fins of the motor T-pulley 3.
• Be careful not to pull the harness of the motor assy 4 by
force.
3. Remove the 2 screws 2, and then remove the 3P socket unit 5 of the
motor 3P supply assy.
<In case of 120V specification, refer to previous page.>
→
Refer to 3 - 7 of the Disassembly.
2
Removal of Lower shaft plate
1. Remove the 2 screws 1, and then remove the lower shaft plate 1.
Main motor unit
2 - 8
1
2
4
3
1
2
5
4
1
1
5