Sirius XM RAdio Stratus 7 User Manual page 40

Vehicle Installation
one bar on the upper right corner of the main display screen that denotes
antenna signal strength . You can also
press and hold menu and then press
to scroll to and highlight Signal . Press
the Select button . The Satellite and
Terrestrial bars show the strength of the
signal being received . If the signal
reception is good, press and hold menu to return to the main display
screen . You are ready to make the audio connection .
6 Ensure that the Stratus 7 is tuned to channel 184 . Upon power up, the
Stratus 7 should tune to channel 184 by default, when it's not yet activated .
If it's not on channel 184, refer to "Operation" on page 54 to learn about
how to tune a channel .
7 Turn on your vehicle's stereo system . Set it to play input from the auxiliary
input source .
8 You should hear Sirius channel 184 through your vehicle's stereo system .
You are now ready to subscribe your Stratus 7 .
9 The audio level output of the Stratus 7 can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle . Refer
to "Audio Level" on page 66 .
If the signal reception is good, but there is no audio when tuned to channel 184,
be sure the vehicle's stereo system is set to the correct source, i .e ., auxiliary
input source (step 7) . Also be sure that the audio level is set high enough to be
heard (step 9) . Refer to "Troubleshooting" on page 74 for additional help .
40