Sirius XM RAdio Stratus 7 User Manual page 27

Follow these detailed cable installation instructions:
1 Use a plastic putty knife or similar tool to lift the rubber molding around
the windshield and tuck the antenna cable underneath it .
2 Continue tucking the cable underneath the windshield molding around the
windshield to the lowest corner .
3 At the lowest corner of the windshield, route the cable out of the windshield
molding and into the rubber weather stripping around the door opening .
Lift the weather stripping from the opening and tuck the cable inside it,
then replace the weather stripping . Run the cable inside of the weather
stripping to the bottom of the door opening .
4 Pull the cable out of the weather stripping at the bottom of the door
opening and route it under the carpet toward the dashboard . Coil any
excess cable in a hidden location, such as under the carpet, keeping it away
from any vehicle pedals or controls . Secure the excess cable with wire ties .
5 Bring the end of the cable out at the Vehicle Dock location . Leave yourself
enough cable so you can easily connect it to the antenna connector on the
Vehicle Dock .
27