Sirius XM RAdio Stratus 7 User Manual page 43

Option 3: PowerConnect Installation Instructions
1 Insert your Stratus 7 into the dock, aligning the
radio against the rear of the dock so that the
rails on the dock fit into the mounting slots in
the back of the radio . )
2 Power on Stratus 7 radio by pressing the Power
button .
3 Be sure the vehicle is outside and the antenna
has a clear view of the sky . Verify that you are
receiving the SiriusXM signal . There should at
least be one bar on the upper right corner of the
main display screen that denotes antenna signal
strength . You can also press and hold menu and then
press to scroll to and highlight Signal . Press the
Select button . The Satellite and Terrestrial bars
show the strength of the signal being received . If the
signal reception is good, press and hold
menu to return to the main display
screen . You are ready to make the audio
connection .
4 You'll first need to find an available FM
channel . An available FM channel is one that's not being used by an FM
radio station in your area . When you tune your FM radio to an available
channel, you should only hear static or silence – not talk or music . We
recommend one of the following methods to find an available FM channel:
a . Use the SiriusXM FM Channel Finder at siriusxm .ca . Go to the website
and enter your zip code . The Channel Finder will suggest a list of
available FM channels in your area . For convenience, write down or
43