Adjusting The Position; Correcting The Keystone Distortions - Hitachi PJ-LC9 User's Manual And Operating Manual

Adjusting the position

1.
Press the POSITION button on the remote control.
The "POSITION" indication will appear on the screen.
2.
Use the cursor buttons ▲/▼/◄/► to adjust the picture
position.
When you want to reset the operation, press the RESET button on the remote
control during the operation. To complete this operation, press the POSITION
button again. Even if you do not do anything, the dialog will automatically
disappear after a few seconds.
● When this function is performed for a video signal, a certain extra such as a line
may appear outside a picture.

Correcting the keystone distortions

1.
Press the KEYSTONE button on the remote control.
A dialog will appear on the screen to aid you in correcting
the distortion.
2.
Use the cursor buttons ▲/▼ to correct the distortion.
To close the dialog and complete this operation, press
the KEYSTONE button again. Even if you don't do anything, the dialog will
automatically disappear after a few seconds.
● The adjustable range for correction will vary among inputs. For some signals,
this function may not work well.
● While setting the WIDE mode for aspect ratio, the correction of keystone
distortion is not effective. (23, 36)
VIDEO SEARCH
RGB
ASPECT AUTO BLANK
Operating
MAGNIFY
VOLUME
ON
MUTE
OFF
FREEZE KEYSTONE
VIDEO SEARCH
RGB
ASPECT AUTO BLANK
-
ZOOM
+
MAGNIFY
VOLUME
ON
MUTE
OFF
POSITION MENU
FREEZE KEYSTONE
- ZOOM
+
MENU
POSITION
ENTER
ENTER
ESC RESET
ESC RESET
VIDEO RGB SEARCH
ASPECT AUTO BLANK
VIDEO SEARCH
RGB
MAGNIFY
ASPECT AUTO BLANK
VOLUME
ON
MAGNIFY
VOLUME
ON
MUTE
OFF
MUTE
OFF
FREEZE KEYSTONE
- ZOOM
+
FREEZE
MENU KEYSTONE
POSITION
ENTER
- ZOOM
ESC RESET
+
POSITION MENU
ENTER
ESC RESET
25