Image Menu; Aspect - Hitachi PJ-LC9 User's Manual And Operating Manual

Multifunctional settings

IMAGE menu

With the IMAGE menu, the items shown in the table below
can be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item

ASPECT

36
Using the buttons ▲/▼ switches the mode for aspect ratio.
For a 16:9 signal
4:3
16:9
For a 4:3 signal
4:3
16:9
For an RGB signal
4:3  16:9  NORMAL
For a video signal, s-video signal or component video signal
4:3  16:9  WIDE  MOVIE1  MOVIE2
For no signal
4:3  16:9
• The NORMAL mode keeps the original aspect ratio of the signal.
• For an HDTV component video signal of 1125i (1080i) or 750p
(720p), this item cannot be chosen.
• Performing the automatic adjustment initializes the aspect ratio
setting.
• While setting the WIDE mode, the correction of keystone distortion
is not effective. (25, 40)
• Setting the WIDE mode may limit the magnify range. (26)
Description
MOVIE1
WIDE
MOVIE1
WIDE
MENU [ RGB ] :SELECT
PICTURE ASPECT 4:3
IMAGE OVER SCAN 5
INPUT V POSITION 25
SETUP H POSITION 142
SCREEN H PHASE 16
OPTION H SIZE 1344
EASY MENU AUTO ADJUST EXECUTE
MOVIE2
MOVIE2