Adjusting The Zoom (Magnifying Power); Adjusting The Focus; Using The Automatic Adjustment Feature - Hitachi PJ-LC9 User's Manual And Operating Manual

Operating

Adjusting the zoom (magnifying power)

1.
Press the ZOOM +/- button on the remote control.
A dialog will appear on the screen to aid you in
adjusting the zoom.
2.
Use the ZOOM buttons +/- to adjust the zoom.
To close the dialog and complete this operation, do not
perform operation for a few seconds.

Adjusting the focus

1.
Use the focus ring to focus on the picture.

Using the automatic adjustment feature

1.
Press the AUTO button on the remote control.
 For an RGB signal
The vertical position, the horizontal position, the clock
phase and the horizontal size will be automatically adjusted. And the aspect
ratio will be automatically selected.
Make sure that the application window is set to its maximum size prior to
attempting to use this feature. A dark picture may still be incorrectly adjusted.
Use a bright picture when adjusting.
 For a video signal or s-video signal
The video format best suited for the respective input signal will be
automatically selected. This function is available only when the AUTO mode
is selected to the VIDEO FORMAT item in the INPUT menu (39).
And the aspect ratio will be selected automatically.
 For a video signal, s-video signal or component video signal
The vertical position and horizontal position will be automatically adjusted.
 For a component video signal
The aspect ratio will be automatically selected.
The clock phase will be automatically adjusted.
● The automatic adjustment operation requires approximately 10 seconds. Also
please note that it may not function correctly with some input.
24