Setup Menu; Zoom / Keystone / Whisper / Mirror / Volume - Hitachi PJ-LC9 User's Manual And Operating Manual

Multifunctional settings

SETUP menu

With the SETUP menu, the items shown in the table below
can be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item
ZOOM
KEYSTONE
WHISPER
MIRROR
VOLUME
40
Using the buttons ▲/▼ adjusts the zoom (magnifying power).
Large  Small
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data  Lower in the data
• The adjustable range for correction will vary among inputs. For
some signals, this function may not work well.
• When the V:INVERT or H&V:INVERT is selected under the
MIRROR item in the SETUP menu, if the projector screen is inclined
or angled downward, this function may not work correctly.
• While setting the WIDE mode for aspect ratio, the correction of
keystone distortion is not effective. (23, 36)
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL  WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL  H:INVERT  V:INVERT  H&V:INVERT
Using the buttons ▲/▼ adjusts the volume.
High  Low
Description
MENU [ RGB ] :SELECT
PICTURE ZOOM 100
IMAGE KEYSTONE +0
INPUT WHISPER NORMAL
SETUP MIRROR NORMAL
SCREEN VOLUME 16
OPTION
EASY MENU