Selecting An Input Signal; Searching An Input Signal - Hitachi PJ-LC9 User's Manual And Operating Manual

Operating

Selecting an input signal

1.
Press the INPUT button on the projector.
Each time you press the button, the projector switches
its input port as below.
RGB  S-VIDEO  VIDEO
1.
Press the RGB button on the remote control to select
the RGB port.
RGB
1.
Press the VIDEO button on the remote control to select
an input port for the video signal.
Each time you press the button, the projector switches
its video input port as below.
S-VIDEO  VIDEO
● When the TURN ON is selected to the AUTO SEARCH item in the OPTION
menu (44), the projector selects the S-VIDEO port first. If no input is detected
at the S-VIDEO port, the projector will check the VIDEO port automatically.

Searching an input signal

1.
Press the SEARCH button on the remote control.
The projector will begin to check its input ports in order
to find any input signals.
Then when an input is found, the projector will stop
searching and display the image.
If no signal is found, the projector will return to the state
selected before the operation.
RGB  S-VIDEO  VIDEO
22
LAMP
TEMP
POWER
INPUT
MENU
STANDBY/ON
SEARCH
VIDEO RGB
ASPECT AUTO BLANK
MAGNIFY
VOLUME
ON
MUTE
OFF VIDEO RGB SEARCH
FREEZE KEYSTONE
- ZOOM
+
ASPECT AUTO BLANK
POSITION MENU
ENTER
MAGNIFY
VOLUME
ON
ESC RESET
MUTE
OFF
FREEZE KEYSTONE
-
ZOOM
+
POSITION MENU
VIDEO RGB SEARCH
ASPECT AUTO BLANK
MAGNIFY ENTER
VOLUME
ON
MUTE
OFF
SEARCH
VIDEO RGB
FREEZE KEYSTONE
ESC RESET
- ZOOM
+
ASPECT AUTO BLANK
POSITION MENU
ENTER
MAGNIFY
VOLUME
ESC RESET
ON
MUTE
OFF
FREEZE KEYSTONE
-
ZOOM
+
POSITION MENU
ENTER
ESC RESET
VIDEO RGB SEARCH
ASPECT AUTO BLANK
MAGNIFY
VOLUME
ON
MUTE
OFF
VIDEO SEARCH
RGB
FREEZE KEYSTONE
- ZOOM
+
BLANK
ASPECT AUTO
POSITION MENU
ENTER
MAGNIFY
ESC RESET VOLUME
ON
MUTE
OFF
FREEZE KEYSTONE
- ZOOM
+
POSITION MENU
ENTER
ESC RESET