Screen Menu; Language / Menu Position / Osd Bright / Blank - Hitachi PJ-LC9 User's Manual And Operating Manual

SCREEN menu

With the SCREEN menu, the items shown in the table
below can be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item
LANGUAGE
MENU POSITION
OSD BRIGHT.
BLANK
Using the buttons ▲/▼ switches the OSD (On Screen Display)
language.
ENGLISH  FRANÇAIS  DEUTSCH  ESPAÑOL  ITALIANO
NORSK  NEDERLANDS  PORTUGUÊS 
 
Using the buttons ◄/►/▲/▼ adjusts the menu position.
To quit the operation, press the MENU button or keep no operation
for 10 seconds.
Using the buttons ▲/▼ switches the brightness level of the OSD (On
Screen Display).
BRIGHT  DARK
Using the buttons ▲/▼ switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature.
(27) It is displayed by pressing the BLANK button.
MyScreen  ORIGINAL  BLUE  WHITE  BLACK
MyScreen is a screen you can register as a desired screen. The
ORIGINAL screen is the existing standard screen. BLUE, WHITE
and BLACK are non-patterned (plain) screens in each color.
• To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLACK screen after several
minutes.
• For the MyScreen, please refer to the MyScreen item. (  42)
Multifunctional settings
Description
 SVENSKA 
SUOMI  POLSKI TÜRKÇE
MENU [ RGB ] :SELECT
PICTURE LANGUAGE ENGLISH
IMAGE MENU POSITION
INPUT OSD BRIGHT 5
SETUP BLANK BLACK
SCREEN START UP ORIGINAL
OPTION MyScreen EXECUTE
EASY MENU MyScreen Lock TURN OFF
MESSAGE TURN ON
41