Adjusting The Projection Position; Adjusting The Zoom; Adjusting The Picture Position - Hitachi CP-A200J User Manual

Operating

Adjusting the projection position

This projector has four elevator feet in the bottom. Use them to adjust the
projection position.
Elevator feet
CAUTION
lengthened exceeding the limit may come off from the projector, and result in an injury.
►Tilt the projector with these elevating feet only.
►Do not tilt the projector over 5 degrees, when it is suspended from a ceiling or
somewhere.

Adjusting the zoom

Press the D-ZOOM + or D-ZOOM – button on the remote control to
display D-ZOOM dialog on screen.
Use the D-ZOOM + and D-ZOOM – buttons to adjust the picture size.
To fi nish the operation, do not touch these buttons for a few seconds
until the dialog is disappeared.
● If you want to expand a part of the image, use the magnify function
23).
(

Adjusting the picture position

Press the POSITION button on the remote control while no menu is
on screen, to display the D-SHIFT dialog on screen. Use the ▲, ▼,
◄ and ► buttons to adjust the picture position. Press the POSITION
button again to fi nish this operation.
● This is a function to shift the position of the shrunken picture by the
zoom function.
● The function is not available, if any menu is displayed on screen.
● The function is not available, if the D-ZOOM is adjusted to 100 (full
screen) on its dialog.
20
►Do not lengthen the elevator feet to 43 mm or more. The foot
max. 43 mm
D-ZOOM + button
OFF
KEYSTONE MY BUTTON MUTE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET
D-ZOOM – button
OFF
KEYSTONE MY BUTTON MUTE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET
POSITION button