Specifications (3 Cylinder Engine) - Westerbeke 8.0KW - 60Hz Operator's Manual

SPECIFICATIONS 12.6KW BTD, 11.5KW BTD, 10.0 BTDA, 8.0KW BTDA
Engine Type
Displacement
Aspiration
Combustion Chamber
Bore
&
Stroke
Firing Order
GENERAL
Diesel, four-cycle, three-cylinder, fresh water-
cooled, vertical in-line overhead valve
mechanism.
80A cubic inches (1.318 liter)
Naturally aspirated.
Swirl type.
3.07 x 3.62 inches (78 x 92 mm)
1 - 3 - 2
General
Fuel
Fuel Injection Pump
Nozzle
Fuel Filter
Air Cleaner
Fuel Lift Pump
FUEL SYSTEM
Open flow, self priming.
No.2 diesel oil (cetane rating of 45 or higher).
In-line plunger type (BOSCH).
Throttle type.
Spin-on replaceable (PN#024363).
Replaceable paper filter cartridge.
12 volt DC lift capacity of 5' (1.5 mm) solid state
Direction of Rotation
Compression Ratio
Weight (Engine Only)
Clockwise, when viewed from the front.
22:1
ELECTRICAL SYSTEM
Inclination
Engine Combustion Air
Requirements at
60 Hz 1800rpm
8.0 BTDA
10.0 BTDA
12.6 BTDA
Continuous 15°
4671bs (211.8 kilos).
5131bs (232.7 kilos)
5131bs (232.7 kilos)
Temporary 25° (not to exceed 30 min.)
41 cfm(1.16cmm)
TUNE-UP SPECIFICATIONS
Compression Pressure
Minimum
Spilled Timing (Static)
Valve Seat Angle
Engine Timing
Injector Pressure
Valve Seat Angle
Valve Clearance
(engine cold)
427 psi (30 kg/em') at 280 rpm
384 psi (27 kg/em')
17° (spill)
45°
17°
BTDC
1991 + 71 - 0 psi (140 + 5 - 0 kgf/em').
Intake 45°
Exhaust 30°
0.25mm (0.0098 inches)
LUBRICATION SYSTEM
General
Oil Filter
Sump Capacity
(not including filter)
Operating Oil Pressure
(engine hot)
Oil Grade
Pressure fed system.
Full flow, paper element, spin-on type.
3.9 U.S.
qts
(3.7 liters)
50 - 60 psi (3.5 - 4.2 kg/em,)
API Specification CF or CG-4,
SAE 30, lOW-3D, 15W-40
Starting Battery
Battery Capacity
DC Charging Altemator
Starting Aid
Starter
Cold Cranking
Amp Drain
General
Operating Temperature
Fresh Water Pump
Raw Water Pump
Raw Water Flow
at 1800 rpm
(Measures before
discharging into
exhaust elbow)
System Capacity
(Fresh Water)
,."""WESTERBEKE
I
Engines & Generators
47
12 Volt, (-) negative ground
600 - 800 Cold Cranking Amps (eCA)
51 Amp rated, belt-driven
Glow plugs, sheathed type
12 Volt, reduction gear
175 amps
(approximate)
COOLING SYSTEM
Fresh water-cooled block, thermostatically-
controlled with heat exchanger.
170 -190 0 F (77 - 88 0
C)
Centrifugal type, metal impeller. belt-driven.
Positive displacement, rubber impeller,
belt driven
7-8 gpm (25.9 - 29.6 gpm)
5.0 US qts (4.7 liters)