To replace the power button, insert the button into the hole in the front panel of the computer cover so that the button's clips secure it to the cover.
l
To replace the reset button, insert the button into the hole in the front panel of the computer cover so that the button's clips secure it to the cover.
l
Mini Tower Chassis
Removing front-panel buttons
l
Replacing front-panel buttons
l
Removing Front-Panel Buttons (Mini Tower Chassis)
1. Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then
2.
Remove the front
panel.
3. Lay the front panel down, with the inside of the panel facing up.
4. Remove the front-panel buttons:
To remove the power button, use a small screwdriver to push in the two plastic clips that secure the button to the computer cover.
l
When these clips are released, the button comes free from the front panel.
To remove the reset button, use a small screwdriver to push in the three plastic clips that secure the button to the computer cover.
l
When these clips are released, the button comes free from the front panel.