Back to Contents Page
Power Supply
Dell Precision™ WorkStation 330 Systems Service Manual
Desktop Chassis
Mini Tower Chassis
Desktop Chassis
Rotating the power supply
l
Removing the power supply
l
Replacing the power supply
l
Rotating the Power Supply (Desktop Chassis)
To access some of the components on the system board, you may need to rotate the system power supply out of the way.
CAUTION:
Before you perform this procedure, see
1. Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then
2. Ensure that the AC power cable is disconnected from the AC power receptacle on the back of the power supply. See
Chassis)."
3. Free the power supply from the securing tab by pressing the tab labeled "RELEASE." Then rotate the power supply upward until it locks in its extended
position.
Rotating the Power Supply (Desktop Chassis)
Removing the Power Supply (Desktop Chassis)
1.
Rotate the power supply
away from the system board.
2. Disconnect the power supply cables from all drives.
3. Disconnect the power supply cables from the system board.
4. Rotate the right side of the power supply up and away from the chassis.
The right pivot pin rises up and exits the chassis slot.
5. Disengage the chassis pivot pin on the right rear of the power supply from the chassis socket.
Removing the Power Supply (Desktop Chassis)
"Precautionary
Measures."
remove the computer
cover.
"Rotating the Power Supply (Desktop