SETTING THE HEART GUIdE INdICATOR
You can change the options for various settings on your monitor. Pressing the SET button to
change a setting. Press the MEM button to select the options for that setting. After selecting
a setting, press the START/STOP button to confirm the setting and turn the power off.
SETTING THE HEART GUIDE INDICATOR
1. Select your User ID.
2. Press the SET button.
NOTE: The default setting is "on1".
User A
3. Press the MEM button to select the Heart guide indicator "on1","on2", or "oFF".
on1: After the Heart guide indicator lights in blue for more than 2 seconds, or
in orange for more than 5 seconds, measurement starts automatically, even
though the monitor is not in the proper position.
on2: The Heart guide indicator lights in blue for more than 2 seconds, measurement
starts automatically.
Measurement will not start if it lights in orange.
oFF: Measurement starts without the Heart guide indicator.
User B
15