Table of Contents
Advertisement
Using the blender
1.
Place the motor unit on a flat surface; make sure the power outlet is unplugged.
2.
When using the big cup and jar, it must be noted that you should peel or core the
fruit or vegetables, and then cut them into small dices. When using the small cup,
the volume of food that is being prepared for juicing should not be too large.
Note: never use boiling liquids or run the appliance empty.
3.
Upend the big cup (or small cup), put the prepared food into the cup. When
making juice, it is required that a certain amount of clean water should be added to
facilitate the smooth running of the appliance.
Note: a. the amount of mixture should not exceed the MAX marking (0.4L) on the big
cup;
b. The milled food in the small cup should not exceed the MAX capacity of
small cup (60g);
c. The amount of mixture should not exceed the MAX marking (0.75L) on the
jar
4.
Select corresponding cup support. The big cup and jar use the cup support with
blending blade (see fig.1), the small cup use the cup support with grinding blade
(see fig.2). Tighten the cup support on the cup or jar by turning the cup support
clockwise.
5: When using jar with handle, you need to tighten the cup support first, then put the
prepared food into the jar. Then insert them into the motor unit, making sure the three
fasteners on the bottom cup support align with the grooves on the motor unit. Tighten
them by turning the jar clockwise.(see fig 3)
Cup support
Blending blade
Jar
Advertisement
Table of Contents
