The Anti-Spam White List Screen - ZyXEL Communications ZyWALL USG 50 User Manual

34.5 The Anti-Spam White List Screen

Click Configuration > Anti-X > Anti-Spam > Black/White List and then the
White List tab to display the Anti-Spam White List screen.
Configure the white list to identify legitimate e-mail. You can create white list
entries based on the sender's or relay's IP address or e-mail address. You can also
create entries that check for particular header fields and values or specific subject
text.
Figure 332 Configuration > Anti-X > Anti-Spam > Black/White List > White List
The following table describes the labels in this screen.
Table 170 Configuration > Anti-X > Anti-Spam > Black/White List > White List
LABEL
General Settings
Enable White List
Checking
Rule Summary
Add
Edit
Remove
Activate
Inactivate
Status
#
ZyWALL USG 50 User's Guide
DESCRIPTION
Select this check box to have the ZyWALL forward e-mail that
matches (an active) white list entry without doing any more anti-
spam checking on that individual e-mail.
Click this to create a new entry. See
details.
Select an entry and click this to be able to modify it. See
34.4.1 on page 581 for details.
Select an entry and click this to delete it.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
The activate (light bulb) icon is lit when the entry is active and
dimmed when the entry is inactive.
This is the entry's index number in the list.
Chapter 34 Anti-Spam
Section 34.4.1 on page 581
Section
for
583