Chapter 20 IP/MAC Binding
20.1.2 What You Need to Know
DHCP
IP/MAC address bindings are based on the ZyWALL's dynamic and static DHCP
entries.
Interfaces Used With IP/MAC Binding
IP/MAC address bindings are grouped by interface. You can use IP/MAC binding
with Ethernet, bridge, VLAN interfaces. You can also enable or disable IP/MAC
binding and logging in an interface's configuration screen.
20.2 IP/MAC Binding Summary
Click Configuration > Network > IP/MAC Binding to open the IP/MAC
Binding Summary screen. This screen lists the total number of IP to MAC
address bindings for devices connected to each supported interface.
Figure 209 Configuration > Network > IP/MAC Binding > Summary
The following table describes the labels in this screen.
Table 98 Configuration > Network > IP/MAC Binding > Summary
LABEL
Edit
Activate
Inactivate
#
Status
350
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where you
can modify the entry's settings.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with a specific entry.
This icon is lit when the entry is active and dimmed when the entry is
inactive.
ZyWALL USG 50 User's Guide