Profile > Query View Screen - ZyXEL Communications ZyWALL USG 50 User Manual

30.6.4 Profile > Query View Screen
Click Switch to query view in the screen as shown in
go to a signature query screen. In the query view screen, you can search for
signatures by criteria such as name, ID, severity, attack type, vulnerable attack
platforms, service category, log options or actions.
Figure 296 Configuration > Anti-X > IDP > Profile: Query View
The following table describes the fields specific to this screen's query view.
Table 149 Configuration > Anti-X > IDP > Profile: Query View
LABEL
Name
Switch to group
view
Query
Signatures
Search all
custom
signatures
Name
Signature
ID
ZyWALL USG 50 User's Guide
DESCRIPTION
This is the name of the profile that y ou created in the IDP > Profiles >
Group View screen.
Click this button to go to the IDP profile group view screen where IDP
signatures are grouped by service and you can configure activation, logs
and/or actions.
Select the criteria on which to perform the search.
Select this check box to search for signatures you created or imported in
the Custom Signatures screen. You can search by name or ID. If the
name and ID fields are left blank, then all custom signatures are
displayed.
Type the name or part of the name of the signature(s) you want to find.
Type the ID or part of the ID of the signature(s) you want to find.
Chapter 30 IDP
Figure 294 on page 493 to
499