Configuring Www Service Control - ZyXEL Communications ZyWALL USG 50 User Manual

Chapter 45 System
Please refer to the following figure.
HTTPS connection requests from an SSL-aware web browser go to port 443 (by
1
default) on the ZyWALL's web server.
HTTP connection requests from a web browser go to port 80 (by default) on the
2
ZyWALL's web server.
Figure 395 HTTP/HTTPS Implementation
Note: If you disable HTTP in the WWW screen, then the ZyWALL blocks all HTTP
connection attempts.

45.7.4 Configuring WWW Service Control

Click Configuration > System > WWW to open the WWW screen. Use this
screen to specify from which zones you can access the ZyWALL using HTTP or
HTTPS. You can also specify which IP addresses the access can come from.
698
ZyWALL USG 50 User's Guide