ZyXEL Communications ZyWALL USG 50 User Manual page 841

Table 277 System Logs (continued)
LOG MESSAGE
Update the profile %s
has failed because the
feature requested is
only available to
donators.
Update the profile %s
has failed because of
error response.
Update the profile %s
has failed because %s.
Update the profile %s
has failed because of
unknown error.
Update the profile %s
has failed because
Username was empty.
Update the profile %s
has failed because
Password was empty.
Update the profile %s
has failed because
Domain name was empty.
Update the profile %s
has failed because
Custom IP was empty.
Update the profile %s
has failed because WAN
interface was empty.
Update the profile %s
has failed because WAN
interface was link-
down.
Update the profile %s
has failed because WAN
interface was not
connected.
Update the profile %s
has failed because IP
address of WAN
interface was empty.
Update the profile %s
has failed because
ping-check of WAN
interface has failed.
Disable DDNS has
succeeded.
Enable DDNS has
succeeded.
ZyWALL USG 50 User's Guide
DESCRIPTION
Update profile failed because the feature requested is only
available to donators, %s is the profile name.
Update profile failed because the response is incorrect, %s is
the profile name.
Update profile failed, and show the response message, 1st
%s is the profile name, 2nd %s is the reason.
Update profile failed because unknown error. Sometimes, the
force authentication will result in this error, 1st %s is the
profile name.
DDNS profile needs username, %s is the profile name.
DDNS profile needs password, %s is the profile name.
DDNS profile needs domain name, %s is the profile name.
The DDNS profile's IP select type is custom, and a custom IP
was not defined, %s is the profile name.
If the DDNS profile's IP select type is iface, it needs a WAN
iface, %s is the profile name.
DDNS profile cannot be updated for WAN IP because WAN
iface is link-down, %s is the profile name.
DDNS profile cannot be updated for WAN IP because WAN
iface is PPP and not connected, %s is the profile name.
DDNS profile cannot be updated because the IP of WAN iface
is 0.0.0.0, 1st %s is the profile name.
DDNS profile cannot be updated because the ping-check for
WAN iface failed , %s is the profile name.
Disable DDNS.
Enable DDNS.
Appendix A Log Descriptions
841