ZyXEL Communications ZyWALL USG 50 User Manual page 488

Chapter 30 IDP
Table 143 Configuration > Anti-X > IDP > General (continued)
LABEL
Add
Edit
Remove
Activate
Inactivate
Move
#
Priority
Status
From, To
IDP Profile
License
License Status
License Type
488
DESCRIPTION
Click this to create a new entry. Select an entry and click Add to
create a new entry after the selected entry.
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To change an entry's position in the numbered list, select it and click
Move to display a field to type a number for where you want to put
that entry and press [ENTER] to move the entry to the number that
you typed.
This is the entry's index number in the list.
IDP policies are applied in order of priority.
The activate (light bulb) icon is lit when the entry is active and
dimmed when the entry is inactive.
This is the direction of travel of packets to which an IDP profile is
bound. Traffic direction is defined by the zone the traffic is coming
from and the zone the traffic is going to.
Note: Depending on your network topology and traffic load,
binding every packet direction to an IDP profile may affect
the ZyWALL's performance.
Use the From field to specify the zone from which the traffic is
coming. Use the To field to specify the zone to which the traffic is
going.
From LAN1 To LAN1 means packets traveling from a computer on
one LAN1 subnet to a computer on another LAN subnet via the
ZyWALL's LAN1 zone interfaces. The ZyWALL does not check packets
traveling from a LAN1 computer to another LAN1 computer on the
same subnet.
From WAN To WAN means packets that come in from the WAN
zone and the ZyWALL routes back out through the WAN zone.
This field shows which IDP profile is bound to which traffic direction.
Select an IDP profile to apply to the entry's traffic direction.
Configure the IDP profiles in the IDP profile screens.
You need to create an account at myZyXEL.com, register your
ZyWALL and then subscribe for IDP in order to be able to download
new packet inspection signatures from myZyXEL.com. There's an
initial free trial period for IDP after which you must pay to subscribe
to the service. See the Registration chapter for details.
Licensed, Not Licensed or Expired indicates whether you have
subscribed for IDP services or not or your registration has expired.
This field shows Trial, Standard or None depending on whether
you subscribed to the IDP trial, bought an iCard for IDP service or
neither.
ZyWALL USG 50 User's Guide