Program Playback; Intro Check - Tascam CD-01U Quick Start Manual

pressing the
REPEAT
You can also enable or disable the repeat
function using the
REPEAT
03).
A-B repeat playback
You can play back the desired portion (between
points A and B) on a track repeatedly by the
following procedure.
1. When the repeat playback function is
disabled, during playback, press and hold
down the key until
REPEAT
the display starts flashing.
2. Press the key at the beginning of
REPEAT
the desired portion.
The A point is set.
3. Press the key at the end of the
REPEAT
desired portion.
The B point is set and the unit
automatically starts repeat playback between
the A and B points.
To stop A-B repeat, press the ·key.
Tip
You can also carry out A-B repeat playback
using the option of the
A-B
menu item (menu 03).

Program playback

Using the program playback function, you can
play back the desired tracks in the desired order.
Creating the program
1. While stopped, press the
The display shows the program setting
screen.
The number on the right shows the program
number.
2. Use the numeric keys or
the desired track you want to set to the
current program number.
3. Press the
SEARCH
The selected track is set and the display
key.
menu item (menu
on
REPEAT
REPEAT
key.
PGM
keys to select
SKIP
˚key.
shows the next program number.
4. Repeat steps 2 and 3 above as many times
as needed.
5. When you finish creating the program, press
the key to exit the program setting
PGM
mode.
To replace a programmed track:
1. On the program setting screen, use the
keys to select the program number
SEARCH
to which the track you want to replace is set.
2. Use the numeric keys or
the desired track with which you want to
replace the current track.
3. Press either of the
SEARCH
the setting.
To add a track:
1. On the program setting screen, use the
keys to select the program number
SEARCH
to which you want to add a track.
2. Press the
A.RDY/INS
3. Use the numeric keys or
the desired track.
4. Press either of the
SEARCH
the setting.
To delete a track:
1. On the program setting screen, use the
keys to select the program number
SEARCH
to which the track you want to delete is set.
2. Press the
A.CUE/DEL

Intro check

Using the intro check function, you can hear the
beginning ten seconds of each track one after
another.
To enable the intro check function, press the
key to turn on
INTRO CHECK
display.
keys to select
SKIP
keys to confirm
key.
keys to select
SKIP
keys to confirm
key.
on the
INT
3