Menu Operation; Various Functions - Tascam CD-01U Quick Start Manual

Menu operation

You can make the following settings via the
menu system.
• Key original function on/off
• Eject block function on/off
• Repeat setting
• Program setting
• Fade in/fade out setting
• Relay function setting
• Timer play on/off
• Mono output on/off
• Resume function on/off
• EOM time setting
• Incremental play function on/off
• Pitch step setting
• RS232C baud rate
• Factory preset
• User data on/off
Basic menu operation
1. Enter the menu mode by:
• pressing the
PITCH
while indicator is lit, or
SHIFT
• pressing the
MENU
control unit.
2. Select the desired menu item by:
• rotating the
PITCH
dial to confirm the selection, or
PITCH
• using the
PREV/NEXT
keys, and pressing the
confirm theselection.
3. Select the desired option by:
• rotating the
PITCH
dial to confirm the selection, or
PITCH
• using the
PREV/NEXT
keys, and pressing the
confirm the selection.
After confirming the selection, the unit automati-
cally exits the menu mode.
Memo
Note that some menu items need different
procedures.
2
dial on the front panel
key on the remote
dial and pressing the
keys or numeric
key to
ENTER
dial, and pressing the
keys or numeric
key to
ENTER

Various functions

In the following description, most operations
are carried out using the remote control unit,
though you may carry out them also from the
front panel.
Auto cue
When the auto cue function is enabled, the
selected track pauses at the beginning of the
audio on the track so that you can start the
music immediately after pressing the ¥key.
Auto ready
When the auto ready function is enabled, after
each track is played back, the unit automatically
pauses at the beginning of the next track.
By pressing
A.RDY/INS
on/off of the auto ready function.
Call function
If you press the
CALL
positon where playback started last time and
pauses.
Incremental play
When the incremental play function is enabled,
pressing the ¥key during playback starts
playback of the next track, while pressing the
·key during playback skips to the next track
and pauses.
You can enable or disable the incremental play
function using the
INCR
Repeat playback
When the repeat playback function is enabled,
the unit repeats playback until you stop. The
repeated area depends on the current playback
mode (for example, if
selected, the unit repeats the current track).
You can enable or disable the repeat function by
key, you can switch
key, the unit returns to the
menu item (menu 11).
mode is
SINGLE