Print Head Use And Care Instructions - SATO SX4M Quick Start Manual

8

Print head use and care instructions

Thermal print heads are sensitive and can be easily damaged if mishandled.
Care should be taken during the installation to avoid dropping the print head or otherwise
impacting the printing element.
CAUTION!
The edge of the print head is the area where printing takes place. Use
care to avoid damage when cleaning the print head as to only touch
the element with the cleaner.
The print head is sensitive to contamination. Do not use media stock that has been con-
taminated by dirt, sand or has been dropped on the floor. Keep the labels in their original
plastic bag when not in use.
The print head should be cleaned at least every 1000 labels or every roll of label stock
used. Wipe the edge of the print head with a clean, soft lint-free cloth and isopropyl alco-
hol.
Due to the sensitive nature of the print head and the potential for user inflicted damage,
the print head warranty is only for the 24 hours within receipt thereof. If the print head
does not perform to expectation upon installation / testing, you must immediately inform a
representative from the company you purchased the print head from, as well as Technical
Support at 800-858-7425.
SX4M / SX5M / TXPSX4 / TXPSX5
Print head use and care instructions
16