Setup And Initial Operation; Connecting The Device - SATO SX4M Quick Start Manual

7

Setup and initial operation

7.1 Connecting the device

7.1.1 Connecting the interface cable
Fig. 7 Printer main body, back
7.1.2 Turning on the device
7.1.2 Turning off the device
7.1.4 Removing the power cable
Setup and initial operation
1
1
Connect the interface cable to the interface
connector (1, 2, 3, 4) on the printer and your
2
PC.
3
4
5
6
1
Connect the power cable to the power sup-
ply connector (6) on the printer and to your
power outlet.
2
Press the POWER button on "I". The
POWER LED lights up.
2
Press the POWER button on "O". The
POWER LED turns off.
1
Before removing the power cable, make
sure to turn off the printer by pressing the
POWER (5) button.
2
Pull the power cable from the power outlet
3
Pull the power cable from the printer.
11
SX4M / SX5M / TXPSX4 / TXPSX5