Figure 6-19: Setup - Voice - User 1 - Cisco Linksys AG310 User Manual

ADSL2+ Gateway with VoIP
The Voice - User 1 Screen
This screen lets you configure the settings for the Internet phone line.
Call Forward Settings
Enter the call forwarding numbers you want to use.
Cfwd All Dest. Enter the number for the Call Forward All Service feature (when you want to forward all calls).
Cfwd Busy Dest. Enter the number for the Call Forward Busy feature (when the line is busy).
Cfwd No Ans Dest. Enter the number for the Call Forward No Answer feature (when the line is not answered).
Cfwd No Ans Delay. Enter the number of seconds to wait before the Call Forward No Answer feature is triggered.
Selective Call Forward Settings
Enter the caller numbers that will be forwarded to specific phone numbers.
Cfwd Sel(1-8) Caller. Enter the caller number pattern to trigger the Call Forward Selective (1-8) feature.

Figure 6-19: Setup - Voice - User 1

Cfwd Sel(1-8) Dest. Enter the forward number for the Call Forward Selective (1-8) feature.
Cfwd Last Caller. Enter the caller number that is actively forwarded to the Cfwd Last Dest number when the Call Forward Last
activation code is used.
Cfwd Last Dest. Enter the forward number for the Cfwd Last Caller feature.
Block Last Caller. Enter the ID of the caller blocked via the Block Last Caller service.
Accept Last Caller. Enter the ID of the caller accepted via the Accept Last Caller service.
Supplementary Service Settings
CW Setting. Select whether you want to use the call waiting feature for all calls, yes or no. The default is yes.
Block CID Setting. Select whether you want to block caller ID for all calls, yes or no. The default is no.
Block ANC Setting. Select whether you want to block anonymous calls, yes or no. The default is no.
DND Setting. Select whether you want to use the Do Not Disturb (DND) feature, yes or no. The default is no.
CID Setting. Select whether you want to enable caller ID generation, yes or no. The default is yes.
CWCID Setting. Select whether you want to enable caller ID for call waiting, yes or no. The default is yes.
Chapter 6: Configuring the ADSL2+ Gateway 30
The Setup - Voice Tab