Figure 6-20: Setup - Voice - Pstn User - Cisco Linksys AG310 User Manual

ADSL2+ Gateway with VoIP
The Voice - PSTN User Screen
This screen lets you configure the settings for the LINE port service, which can be a PSTN service or a second VoIP service.
PSTN-To-VoIP Selective Call Forward Settings
Enter the landline caller numbers that will be forwarded to specific Internet phone numbers.
Cfwd Sel(1-8) Caller. Enter the caller number pattern that will be forwarded to the Cfwd Sel(1-8) Dest number.
Cfwd Sel(1-8) Dest. Enter the forward number for the Cfwd Sel(1-8) Caller. If this is blank, then the landline caller is blocked
for Internet phone service.
PSTN Ring Thru Line 1 Distinctive Ring Settings

Figure 6-20: Setup - Voice - PSTN User

Enter the landline caller numbers that will trigger the corresponding ring tones for Line 1.
Ring(1-8) Caller. Enter the caller number pattern to play Distinctive Ring/Call Waiting Tone (1-8).
PSTN Ring Thru Line 1 Ring Settings
This ring tone will be used to ring through Line 1.
Default Ring. Select the default ringing pattern for all callers. If you select Follow Line 1, then the ring selection will be
determined by Line 1's distinctive ring settings.
When you have finished making your change, click the Submit All Changes button to save the changes, or click the Undo All
Changes button to undo your change.
Chapter 6: Configuring the ADSL2+ Gateway 32
The Setup - Voice Tab