aring for Your Dryer
Caring for your Dryer is Very Important
It's not difficult to care for your dryer but it is important
that you do care for it to get the best out of it.
Clean the filter after each use and check it before
each use. It should also be cleaned if the ''Clean
Filter'' light becomes illuminated and the buzzer
sounds whilst the dryer is in operation.
Cleaning or emptying the filter will reduce drying
times and energy consumption and lengthen the
- The lint trap has to be cleaned frequently, if applicable.
- Lint must not to be allowed to accumulate around the
- Filter must be cleaned after every cycle completes.
1. Open the door.
2. Pull the filter out.
3. Clean the filter
by using a
or rinsing under
4. Replace the filter.
- Push the filter all
the way down to
with the door.
5. Close the door.
- After washing the filter, please dry thoroughly.
- Lint must not be left to accumulate in the dryer.
If the filter is not in your dryer, you can not
operate the dryer.
If "Clean Filter" symbol is displayed during the
operation, clean the filter promptly.
1.Cool the dryer down and follow the above steps.
2.Press the Start/Pause button.
Empty Water Container
Condensed water is collected in the water container.
Empty the water container after every use.
Not doing so will affect the drying performance.
If the water container is full, the "Empty Water"
lamp glows and the buzzer sounds while the dryer
is operating. If this should occur, the water
container needs to be emptied within the next hour.
1. Pull out the
2. Empty water
3. Push it back into the dryer.
4. Press the Start/Pause button.
A high atmospheric temperature and a small
room may both increase drying time as well as
Do not drink the condensed water.
If the laundry is not spun at a high speed
during washing, energy consumption and
drying time will increase.
In some instances, LED window may
" (Empty water symbol) and the
dryer may stop because the water container