Key Features - Rosewill RGS-108P User Manual

The switch is plug-n-play without any software to configure and also fully
compliant with all kinds of network protocols. Moreover, the rich
diagnostic LED indicators on the front-panel provide the operating status
of individual port and whole system.

Key Features


Compliant with IEEE802.3az Energy Efficient Ethernet which allows
individual ports to enter a low power idle based on data flow usage.

Compliant with IEEE802.1p Fixed LAN Layer 2 QoS/CoS Protocol
for Traffic Prioritization for better data transfer management

Complies with 10BASE-T specifications of the IEEE802.3 standard

Complies with 100BASE-TX specifications of the IEEE802.3u
standard

Complies with 1000BASE-T specifications of the IEEE802.3ab
standard

Power over Ethernet (PoE) Standard Compliant with IEEE802.3af or
IEEE802.3at (DTE power via MDI):
- Supports 4x PoE ports or 2x PoE+ ports (or 1 PoE+ port + 2PoE
ports)
- 4x PoE ports supports: 802.3af, 15.4W per ports, port 1~4
- 2x PoE+ ports supports: 802.3at, 31.5W per ports, port 1 & 2
- Up to 63W maximum for all PoE Ports (Port 1~4);
- Supports PoE Over Current Protection;
- Supports PoE Circuit Shorting Protection
- Supports PoE Powered Device(PD) classification identify allows to
detect power range

PoE/PoE+ Full load: PoE+: 31.5W(at) x 2 Ports = 63W ; or
PoE: 15.4W(af) x 4 Ports = 61.6W

Provides 4 PoE ports with classification identify

8x RJ-45 ports for 100BASE-TX and 1000 BASE-T and 10BASE-T
connectivity

Provide 8x 10/100Mbps auto-detect（half/full） and 1000Mbs full
duplex switch ports (IEEE802.3/ 802.3u/ 802.3ab)

Supports MDI/MDI-X auto crossover

Wire-speed packet filtering and forwarding rate

Store-and-forward architecture filters fragment & CRC error packets

Supports extensive LED indicators for network diagnostics

Internal universal switching power supply
5