NETGEAR ProSafe Premium WNDAP620 Reference Manual page 65

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Figure 34.
2. Specify the settings as explained in the following table:
Table 16. SNMP settings
Setting
SNMP
Read-Only Community Name Enter the community string to allow the SNMP manager to read the
Read-Write Community Name Enter the community string to allow the SNMP manager to read and write
Trap Community Name
IP Address to Receive Traps
Trap Port
3. Click Apply to save your settings.
Description
Select the Enable radio button to allow the SNMP network management
software, such as HP OpenView, to manage the wireless access point
through SNMPv1/v2 protocol. By default, the Disable radio button is
selected.
wireless access point's Management Information Base (MIB) objects. The
default is public.
the wireless access point's MIB objects. The default is private.
Enter the community string to allow the SNMP manager to send traps. The
default is trap.
Enter the IP address of the SNMP manager to receive traps sent from the
wireless access point.
Enter the number of the SNMP manager port to receive traps sent from the
wireless access point. The default is 162.
Management and Monitoring
65