Configure Wireless Intrusion Detection And Prevention Mail Settings - NETGEAR ProSafe Premium WNDAP620 Reference Manual

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Configure Wireless Intrusion Detection and Prevention Mail
Settings
For the IDS/IPS to send a notification according to the policy rule, you need to configure the email
settings.

To configure IDS/IPS email settings:
1. Select Configuration > IDS/IPS Mail Settings. The IDS/IPS Mail Settings screen
displays:
Figure 55.
2. Configure the settings as explained in the following table.
Table 25. IDS/IPS mail settings
Setting
Show as Mail Sender
SMTP Server
Port Number
This server requires
authentication
Send Notifications to Admin The email address to which the notifications should be sent. Typically, this is
3. Click Apply to save your settings.
Description
A descriptive name of the sender for email identification purposes. For
example, enter WNAP620-IDS-IPS@company.com.
The IP address or Internet name of the outgoing email SMTP server of your
ISP.
The port number of the outgoing email SMTP server of your ISP. The default
port number is 25.
If the SMTP server requires authentication, select the This server requires
authentication check box, and enter the user name and password.
User Name The user name for SMTP server authentication.
Password The password for SMTP server authentication.
the email address of the administrator.
Management and Monitoring
95