Configure Advanced Wireless Settings - NETGEAR ProSafe Premium WNDAP620 Reference Manual

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Figure 63.
2. To enable HTTP redirection, select the Enable radio button. By default, the Disable radio
button is selected.
3. In the Redirect URL field, enter the URL of the web server to which you wish to redirect
HTTP requests.
4. Click Apply to save your settings. All HTTP requests are now redirected to the specified
URL.

Configure Advanced Wireless Settings

Use the advanced Wireless Settings screen to configure and enable various WLAN settings
for the 802.11b/bg/ng or 802.11a/na modes. You can configure the settings only for the active
mode. (For information about how to change the wireless mode, see
Wireless Settings on page 28.)
The default WLAN settings normally work well. However, you can use the advanced settings
to fine-tune the overall performance of the wireless access point for your specific
environment.

To configure advanced wireless settings:
1. Select Configuration > Wireless > Advanced > Wireless Settings. The advanced
Wireless Settings screen displays. The following figure shows the 11ng settings, as
indicated by the radio wave icon ( ) that is displayed next to ng:
Advanced Configuration
107
Configure the Basic