Table of Contents
Advertisement
• Using two 3/4 in. wrenches, disconnect the burner supply
tube.
Figure 12.7 Disconnect Burner Supply Tube
• Remove the two screws securing the valve to the valve
bracket.
Ground
Wire
Figure 12.8 Remove Valve from Valve Bracket
• Disconnect the pilot and orifice tubes using a 7/16 in. and
a 5/8 in. wrench.
• Reverse these steps to replace the gas valve and covers.
Make sure the ground wire is reattached as shown in
Figure 12.8.
Outdoor Lifestyles by Hearth & Home Technologies • Dakota 42-B/Dakota 42H-B • 4036-909 • Rev P • 11/4/13
B. Battery Replacement
• Remove switch cover plate from the wall.
Figure 12.9 Switch Cover Plate
• Replace two D-cell battieres.
Figure 12.10 Batteries
• Replace switch cover plate.
26
Advertisement
Table of Contents
