Table of Contents
Advertisement
Before starting this unit
1. Select a suitable location, making sure you have a level surface with no obstructions, and easy access to an electrical outlet.
2. Install the window adapter kit, as described in the Installation section.
Note: The window adapter kit is required only while using the Cool and Heat mode.
3. Plug the unit into a grounded electrical outlet. Do not use an extension cord.
Operating Instructions
Air Conditioner /Cool Mode
1. Install the window adapter kit and hoses to the unit.
2. Press the On/Off button to turn the unit on. The unit will
power up and display the room temperature.
3. Press the Mode button until the Cool mode icon
display on the LCD.
4. Press the Temp/Timer Set buttons to set the desired
temperature. While you are adjusting the setting, the
display will show the set temperature. After you have
finished adjusting the temperature, the display will
default back to show the room temperature after
15 seconds.
5. Press the Fan Speed button to select the desired setting
(High, Med, Low). The fan speed indicator on the LCD
will show the selected speed.
6. Condensed water may accumulate in the unit. If the
internal tank becomes full, the warning light will shine and
the unit will not operate until the unit has been drained.
See Draining Excess Water section for instructions on how
to drain the water.
7. Once the room reaches the set temperature, the
compressor will turn off and the fan will continue to
operate.
Heat Mode (Only on Heat/Cool models)
1. Press the On/Off button to turn the unit on. The unit will
power up and display the room temperature.
2. Press the Mode button until the Heat mode icon appears
on the LCD display.
3. Press the Temp/Timer Set buttons to set the desired
temperature. While you are adjusting the setting, the
display will show the set temperature. After you have
finished adjusting the temperature, the display will
default back to show the room temperature after
15 seconds.
4. Press the Fan Speed button to select the desired setting
(High, Med, Low). The fan speed indicator on the LCD
will show the selected speed.
Dehumidify Mode
1. Press the On/Off button to turn the unit on. The unit will
power up and display the room temperature.
2. Press the Mode button until the Dehumidify icon
appears on the LCD display.
3. The fan will operate in Low speed. The fan speed is not
adjustable under the Dehumidification mode while the
room temperature is below 77°F (25°C).
4. Condensed water may accumulate in the unit. If the
internal tank becomes full, the warning light will shine
and the unit will not operate until the unit has been
drained. See Draining Excess Water section.
Fan Mode
1. Press the On/Off button to turn the unit on. The unit will
power up and display the room temperature.
2. Press the Mode button until the Fan icon appears on
the LCD display.
3. Press the Fan Speed button to select the desired setting
(High, Med, Low). The fan speed indicator on the LCD will
show the selected speed. The unit will operate
continuously in Fan mode.
Timer
The timer can be set to turn the unit off or on. The timer is
adjustable between 1 and 24 hours.
To turn unit off automatically:
1. With unit powered on and running in desired mode,
press timer button.
2. Use Temp/Timer Set buttons to select number of hours
you would like the unit to run until it automatically
shuts off. After you have finished adjusting the timer,
the display will default back to the room temperature.
Timer indicator will blink when set. To turn timer off,
press the timer button.
To turn unit on automatically:
1. With unit powered on select desired mode and fan
speed, then power unit off.
2. With machine powered off, press timer button to select
number of hours until you would like the unit to
automatically start running in air conditioning mode.
Timer indicator will blink when set. The display will
show the number of hours the unit is set until it begins
operation. To turn timer off press the timer button.
7
Hide quick links:
Advertisement
Table of Contents
