Station Search - SMART Audio System navigation/multimedia Supplement Manual

Waveband
FM (VHF), FMT, FM
dynamic
MW (medium wave)
SW (short wave)
LW (long wave)
Selecting a station
Selecting a station using the station
search function
X
Press the û or ü button in the
Y
radio display ( page 80).
The needle jumps left or right in the
waveband and stops at the next station
with adequate reception.
i
If you have activated traffic announce-
Y
ments (TA) ( page 85), only RDS stations
are searched for.
Selecting a station using the waveband
scan
X
Press symbol B in the radio display
Y
( page 80).
The station preset memory appears
Y
( page 81).
X
Press the magnifying glass symbol in the
station preset memory.
The "Station search" menu appears.
"Station search" menu
Frequency
87.5 – 108.0 MHz
531 – 1602 kHz
3900 – 9990 kHz
153 – 279 kHz
X
Band scanning.
Press
Band scanning...
The
All available stations are played
briefly.
When the smart radio finds a station, the
Playing 98.3
display shows
example.
X
To select the station being played: press
1.
The band scan is stopped.
Selecting stations via the station pre-
sets
Option 1
The station assignment of preset positions
1 to 4 appears in the radio display under
the waveband.
X
Press one of preset positions 1 to 4.
The selected station is played.
Option 2
X
Press symbol B in the radio display
Y
( page 80).
The station preset memory appears.
Station presets
An arrow and a note indicate under which
preset the currently selected station is
stored.
Radio mode
message appears.
MHz, for
81