Changing; Selecting A Keyboard; Setting The Standby Time - SMART Audio System navigation/multimedia Supplement Manual

X
Call up the system settings menu
Y
( page 26).
The entry on the right beside
shows the current setting.
X
Press Language.
The list of languages appears. The cur-
rently selected language is identified
by the O symbol.
X
Press 9 or : to scroll through the
list.
X
Select the desired language.
Audio system navigation/multimedia
loads the language and switches back to
the system settings menu.

Selecting a keyboard

The keyboard selection affects the selec-
tion options in the input menus (keyboard
layout, special character entry).
You can select the following keyboard set-
tings:
Alphabetical
R
German (German "QWERTZ" computer key-
R
board)
English (UK)
R
French
R
Cyrillic
R
X
Call up the system settings menu
Y
( page 26).
The entry on the right beside
shows the current setting.
X
Press Keyboard.
A list appears.
X
Select the desired keyboard.
Audio system navigation/multimedia
loads the keyboard and switches back to
the system settings menu.

Setting the standby time

After it has been switched off, audio system
navigation/multimedia switches to
standby mode in which it consumes more
power. In this mode, the device is ready for
use quickly after being switched on again.
Language
Standby mode is terminated after a defined
time period (standby time). The device is
now switched off and changes to the energy-
saving operating mode. You can set the
standby time individually.
i
The standby time is preset to 18 h. Set-
ting a low standby time is recommended
when, for example, the battery charge is
low.
If audio system navigation/multimedia
is operated while the engine is switched
off, the device also goes into standby
mode after 30 minutes. You will see a
warning message to this effect.
X
Call up the system settings menu
Y
( page 26).
The entry to the right of
shows the current setting.
X
Press
A settings menu appears.
X
Press = or Ì to adjust the standby
time. You can select values between 1 and
24 h.
X
Press OK.
Audio system navigation/multimedia
accepts the value and switches back to
the system settings menu.
Keyboard
Changing the security code
Entering a four-digit security code serves
to protect against theft. The security code
must be entered after disconnecting the
battery, for example.
The security code is set to "0000" at the
factory. It is recommended that you change
the security code.
i
Memorise the changed security code. If
you have incorrectly entered the secur-
ity code ten times, audio system naviga-
tion/multimedia is locked. In this case,
System settings
Standby time
Standby time
in the menu.
27