SMART Audio System navigation/multimedia Supplement Manual page 87

Traffic Programme
Note
Many FM stations transmit traffic
announcements (TA).
Switching traffic announcements on/off
X
Press d in the radio display
Y
( page 80).
The settings menu appears.
X
Traffic announcement.
Press
Depending on the previous status, the
function is switched on O or off ª.
i
It is also possible to switch traffic
announcements off when a traffic
announcement is being received
Y
( page 85).
X
Press the & button and return to the
radio display.
The car symbol at the top of the display
indicates that announcements are switched
on. If the selected station does not broad-
cast traffic announcements, this symbol is
crossed out in red.
Once traffic announcements have been
switched on, audio system navigation/mul-
timedia selects an RDS station.
Traffic Programme is retrieved from:
the currently selected FM station
R
an RDS station from the network of the
R
currently selected FM station
the RDS station with the best reception
R
quality
When traffic announcements are switched
on, a traffic announcement will interrupt
the audio signal from the currently acti-
vated audio or video source.
i
Telephone conversations and naviga-
tion announcements are not interrupted.
Incoming traffic announcements
An incoming traffic announcement is indi-
cated by a message.
X
To interrupt a traffic announcement:
press 1 in the message displayed.
Audio system navigation/multimedia
switches back to the audio source that
was selected before the announcement.
Subsequent traffic announcements will
interrupt the audio source again.
X
To switch off traffic announcements:
press O in the message displayed.
No more traffic announcements are made.
Radio text
Notes
This function is available in FM radio
mode.
Radio text is additional information that
is shown in the radio display, e.g. infor-
mation about the current programme.
The radio text is switched off in the stand-
ard setting.
Radio mode
85