Storing Stations Manually - SMART Audio System navigation/multimedia Supplement Manual

Storing stations

Storing stations manually

There are 32 preset positions available
each for the FM and FMT wavebands. You
cannot store stations manually in the FM
dynamic waveband. Up to 12 stations can be
stored in the MW, LW and SW wavebands.
X
Quick save: in the radio display, press
and hold one of preset positions 1 to 4
until you hear a confirmation tone.
The currently set station is stored to the
preset position selected.
X
In the preset memory: press the 9
or : button to scroll through the list.
X
Press and hold a preset position until
you hear a confirmation tone.
The currently set station is stored to the
preset position selected.
Storing stations automatically (travel
store)
This function automatically assigns sta-
tions that can be received to the preset
memory for the FMT waveband. The entire
waveband is searched, starting at the low-
est frequency. The 32 stations with the best
reception quality are stored to the preset
positions according to their reception
quality. The station with the best recep-
tion is stored at preset position 1.
X
Press B in the radio display
Y
( page 80).
The station preset memory appears.
X
Press the magnifying glass symbol in the
station preset memory.
X
Travel store
Press
search" menu.
X
Travel store...
The
Audio system navigation/multimedia
searches for stations that can be
received. The available stations are
automatically stored in the preset posi-
tions.
in the "Station
message appears.
X
To cancel the function: press 1.
Radio Data System (RDS)
General notes
The Radio Data System (RDS) provides
inaudible additional information in the
FM wavebands (FM, FMT, FM dynamic). The
system consists of a listening receiver and
a monitoring receiver.
The monitoring receiver constantly scans
the FM waveband and collects data from all
the stations that can be received, e.g.
reception quality and RDS data such as pro-
gramme names and alternative frequen-
cies. Audio system navigation/multimedia
stores the data and constantly updates the
presets. The listening receiver is there-
fore able to switch instantaneously to an
alternative frequency with a better signal.
i
RDS only functions for stations which
transmit RDS data.
Switching RDS on/off
X
Press d in the radio display
Y
( page 80).
The settings menu appears.
X
RDS
Press in the menu.
Depending on the previous status, the
function is switched on O or off ª.
X
Press the & button and return to the
radio display.
Radio mode
83