ZA smart entry line Radio USA ÄJ 2010/Ma; 1; 2, en-US
sabbaeu
X
From another function: press the $
button.
The radio switches to radio mode. You
will hear the last station selected.
Switching wavebands
The following wavebands are available:
FM
R
AM
R
X
To select a waveband: press the :
or ; button to select a waveband and
press 9 to confirm.
The currently selected waveband is
indicated by a dot.
X
Press the =, ; or % button to
exit the menu.
Selecting a station
General information
Stations may be selected in the following
ways:
using the station search (
R
by entering the frequency manually
R
Y
(
page 9)
using the station presets (
R
Selecting stations using the station search
function
X
Set the desired waveband (
X
Press the ; button.
The station search starts and searches
forwards.
The search stops at the next station
R
that can be received.
If the end of the waveband is reached,
R
the search continues at the beginning
of the waveband.
If no station is found, the search stops
R
at the point where the search was
started.
2010-05-25T11:40:36+02:00 - Seite 9
Version: 3.0.3.6
Manual frequency entry
Manual frequency entry is available in all
wavebands.
X
Set the desired waveband (
X
Press the $ button.
X
Press the 9 or : button to select
Enter Frequency
confirm.
The display for manually entering the
frequency appears.
Manual frequency entry
X
Press the 9 or : button to set a
higher or lower value for the first digit.
X
To set the values of the following digits:
press the ; button to select the digit.
X
Press the 9 or : button to set a
Y
page 9)
higher or lower value for the selected
digit.
X
Press the % button to exit the menu.
Y
page 9)
Selecting stations via the station presets
X
Select the desired preset group (FM 1,
FM 2 and AM).
Y
page 9).
X
Press one of the station presets 4 –
3.
The radio selects the station stored
under the selected preset.
Storing stations
General information
Each preset group (FM1, FM2, and AM)
provides six presets.
>> smart entry line radio.
Y
page 9).
and press 9 to
9
Z
Need help?
Do you have a question about the entry line radio and is the answer not in the manual?