SMART Audio System navigation/multimedia Supplement Manual page 84

Radio mode
82
X
Press the 9 or : button to scroll
through the list.
X
Press the desired station.
The selected station is played.
X
Press the symbol on the bottom left to call
up the radio display.
Selecting stations by entering the fre-
quency manually
You can use this function for FM wavebands.
X
Press symbol B in the radio display
Y
( page 80).
The station preset memory appears.
X
Press the magnifying glass symbol in the
station preset memory.
X
Enter
Press
An input menu appears.
X
Enter the desired frequency by pressing
the numbers.
The frequency is shown at the top right;
the dot is entered automatically.
X
OK
Press and confirm the frequency
entered.
If the smart radio finds the respective
station, the display shows
98.3 MHz, for example. The radio dis-
play then appears.
i
You can only enter currently permitted
numbers.
If you enter a frequency that is outside
the frequency range, audio system navi-
gation/multimedia sets the next lower
frequency.
frequency.
Playing
Selecting a station by entering the sta-
tion name
You can use this function for FM wavebands.
X
Press symbol B in the radio display
Y
( page 80).
The station preset memory appears.
X
Press the magnifying glass symbol in the
station preset memory.
X
Enter station
Press
An input menu appears.
Entry line
:
To delete an entry
;
To enter numbers and special charac-
=
ters
To enter umlauts
?
X
Enter a station name. Instructions for
entering characters can be found in the
"At a glance" section (
X
To confirm the entry: press OK.
Searching...
The
then see a list of stations that can be
received.
X
Press the 9 or : button to scroll
through the list.
X
Press the desired station.
X
Press the & button to exit the list.
The selected station is played.
If no station is found for an entry,
found
is shown, for example.
name.
Y
page 15).
display appears. You
G not