Audio Settings - SMART Audio System navigation/multimedia Supplement Manual

Audio settings

98
permission, these restrictions do not
apply.
Notes on CDs/DVDs
Discs with copy protection are not compat-
ible with the audio CD standard and there-
fore may not be able to be played by audio
system navigation/multimedia.
You may encounter playback problems when
playing copied discs. There is a wide
range of data carriers, disc-writing soft-
ware and writers available. This variety
means that there is no guarantee that the
system will be able to play discs that you
have copied yourself.
There may be playback problems if you play
CDs that you have copied yourself with a
storage capacity of more than 700 MB. CDs
of this type do not conform to the currently
applicable standards.
!
Do not affix stickers or labels to the
discs. They could peel off and damage the
drive.
The drive is designed to hold discs which
comply with the EN60908 standard. There-
fore, you can only use discs with a max-
imum thickness of 1.3 mm.
If you insert thicker discs, e.g. those
that contain data on both sides (DVD on
one side and audio data on the other),
they cannot be ejected and can damage
the drive.
Do not use discs with a diameter of 8 cm,
even with an adapter. Only use round
discs with a diameter of 12 cm.
i
The device can play audio CDs with
high-resolution multichannel audio
format. Super audio CDs are played back
at CD quality.
Audio settings
Calling up the audio settings menu
Option 1
X
Extras
Select from the main menu
Y
( page 10).
X
Options
Select from the menu.
The general settings menu appears.
X
Audio settings.
Select
Option 2
X
Press the t button for longer than two
seconds.
You can make the following audio settings:
balance
R
bass/treble
R
X-bass
R
sound profile
R
equaliser
R
Dynamic Noise Covering
R
i
The settings for balance, bass/treble
and X-bass can be found in the "At a
Y
glance" section ( page 19).