Time Entry; Clock Settings - SMART Audio System navigation/multimedia Supplement Manual

X
Select the desired colour scheme.
X
OK
Press to confirm the selection.
The display appears in the selected col-
our scheme.

Clock settings

Introduction
Audio system navigation/multimedia sets
the time automatically if it has sufficient
GPS reception.
You can also set the time manually (e.g. if
there is no GPS reception or the reception
is insufficient). However, the time that you
enter will be overwritten when there is GPS
reception. The time zone and summer time
settings are not changed.
Calling up the "Time entry" menu
X
Extras
Press in the main menu
Y
( page 10).
X
Options
Press in the menu.
The general settings menu appears.
X
Clock settings.
Press
Setting the time
The time is shown in the status bar in the
radio display.
X
Call up the "Time entry" menu
Y
( page 25).
X
Edit time.
Press
X
Press the available numbers (shown in
white) one after another.
The colon between the hours and minutes
is entered automatically.
X
Press OK.
The setting is accepted and the "Time
entry" menu appears.
Setting the time format
You can set the format to 24-hour or 12-hour
(AM/PM).
X
Call up the "Time entry" menu
Y
( page 25).
The entry on the right beside
mode
shows the current setting.
X
12 hour mode.
Press
The entry on the right beside
mode
changes.
Setting the time zone
X
Call up the "Time entry" menu
Y
( page 25).
The entry on the right beside
zone
shows the current setting.
X
Time zone.
Press
A list appears for the selection of the
time zone. The currently selected time
zone is identified by the O symbol.
Clock settings
12 hour
12 hour
Time
25