Table of Contents
Advertisement
GPO Configuration
To adjust GPO 1 or GPO 2, press the associated button to display a screen similar to that shown in Figure
6-20
Table 6-4 lists the options available for General Purpose Output (GPO).
Factory Reset and Soft Reset clear the protective
mute state.
Two input options (GPI) and two output options (GPO) may be set at any one time. The default GPIO
configuration is shown in Table 6-5. The current state (open/closed) is reported for all GPIO settings on the
LM 26 front panel and in the Lake Controller software.
Figure 6-20: GPO Configuration
Acting on
Protective Mute State
Standby State
Fault
Ready
No Indication
Table 6-4: GPO Options
State when Closed
1. Muted
2. Unmuted
1. Standby
2. On
1. No Fault
2. Any Fault
1. Ready
2. Not Ready
-
LM 26 Operation Manual rev 1.1.8
Front Panel Interface
35
Advertisement
Table of Contents
