Module I/O Mute Buttons And Led Meters - Lab.gruppen Lake LM 26 Operation Manual

6.8

Module I/O Mute Buttons and LED Meters

The LM 26 provides mute functions at several points in the audio signal path. Please refer to section 5.1 for
mute locations and descriptions.
Three types of mute are available from the front panel:
1. LM 26 Input Mutes
2. Module Input Mutes
3. Module Output Mutes
LM 26 Input Mutes are displayed on the LCD screen in Input Meter Mode and are controlled using the
adjacent buttons and rotary encoder. The Input Mutes can also be viewed and changed via the front panel
I/O CONFIG Menu. Module Input and Output Mutes are controlled via the dedicated mute buttons under-
neath each channel's five-segment LED meter as shown in Figure 6-4.
Figure 6-4: LM 26 Dedicated Module Input and Output Mutes
6.8.1 Module Input and Output Mutes
The LM 26 provides dedicated mute buttons for the two module inputs (A/B) and six module outputs (1>6)
as labelled in Figure 6-4. To mute or unmute a module input or output, tap the corresponding button. The
button is illuminated white when unmuted, and red when muted.
Refer to the Lake Controller Operation Manual for details of Module mute controls via the software.
Front Panel Interface
LM 26 Operation Manual rev 1.1.8
19